I recently tried out wireguard. The
AllowedIPs setting confused me a bit. The name, many blog posts and some parts of the documentation mention that this setting is some kind of source IP address filter.
But when you have 2 peers in a config that have all addresses allowed you will get errors. An example config for that could look like this (pls forgive me for only using legacy IP in this example):
[Interface] PrivateKey = < priv key here > ListenPort = 51820 [Peer] Endpoint = 172.20.1.104:51820 PublicKey = zfiU3b7CSyTiGZ9YIAOyvKgDHsFsL78Vij6kB9615ys= AllowedIPs = 0.0.0.0/0 [Peer] Endpoint = 172.20.1.126:51820 PublicKey = X++p6RAoYuGE0GXiDI+bJbsS0kI9odzwIUpef5nVKRo= AllowedIPs = 0.0.0.0/0
If the interface is running and you enter a
wg show, the result has no
AllowedIPs for the first peer.
interface: wg-p2p public key: EfGMYv8Vd3DPLzyAKeMtDe6FzU+EVangtMRnkC+urik= private key: (hidden) listening port: 51820 peer: zfiU3b7CSyTiGZ9YIAOyvKgDHsFsL78Vij6kB9615ys= endpoint: 172.20.1.104:51820 allowed ips: (none) latest handshake: 1 minute, 59 seconds ago transfer: 180 B received, 284 B sent peer: X++p6RAoYuGE0GXiDI+bJbsS0kI9odzwIUpef5nVKRo= endpoint: 172.20.1.126:51820 allowed ips: 0.0.0.0/0 transfer: 0 B received, 3.47 KiB sent
This is because the
AllowedIPs setting is not only used as a source filter. It is also how wireguard decides to which peer a packet is send. A packet is send to the peer which has the destination address in its
AllowedIPs of peers on an interface can not overlap because wireguard does not know which of the multiple peers it has to choose. Each address can only be used once for each interface. Wireguard does not do routing itself! Adding a longer prefix in the
AllowedIPs does not mean that only this peer will receive the traffic. It means that you have overlapping addresses configured.
The routing is still done by the linux kernel. The regular routing table needs an entry to send some traffic via the wireguard interface. Only if the routing table decides to send traffic via the wireguard interface the peer config comes into play.
This also means that if you want to build point to point links with wireguard for e.g. for an encrypted, routed backbone you have to create one interface per link. (And not one interface with many peers.)